Manual Mill: Difference between revisions
Jump to navigation
Jump to search
Created page with "JET JET-15 Mill / Drill Appears to be an older version of the [http://content.jettools.com/assets/manuals/350020_man_EN.pdf JMD-15 Mill Drill]" |
No edit summary |
||
| (6 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
{{Metal Shop}} | |||
JET JET-15 Mill / Drill | JET JET-15 Mill / Drill | ||
[[File:Noisebridge_Jet_15.png|400px]] | |||
Appears to be an older version of the [http://content.jettools.com/assets/manuals/350020_man_EN.pdf JMD-15 Mill Drill] | Appears to be an older version of the [http://content.jettools.com/assets/manuals/350020_man_EN.pdf JMD-15 Mill Drill] | ||
We have a JET-15 milling machine. The manual is elusive and hard to find online, but we keep a copy in a binder in the metalshop. | |||
It mostly works, however: | |||
* The spindle is prone to overheating and needs to be lubricated somehow. | |||
* There is no spindle brake that we know of, you might want to use a strap wrench to hold onto the spindle while tightening / loosening the drawbar. | |||
== Quill feed == | |||
[[File:JET 15 mill fine feed.jpg|300px|thumb|left]] | |||
To engage or disengage the fine feed, slide the black ring on the quill lever's shaft. | |||
* Pull right to disengage fine feed. | |||
* Push left to engage fine feed. You might need to rotate the handwheel a bit until it meshes with the ring. | |||
== Changelog == | |||
* 21 April 2024: The power plug was not fully enclosed, meaning metal shavings could get in. Replaced the power cable | |||
* 20 April 2024: Removed rust from mill bed, fixed quill feed mechanism | |||
Latest revision as of 22:26, 21 April 2024
| Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate | E |
| Guilds (Volunteer) | Maintainers | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | WGs | E |
| Fabrication | Sewing | 3D Printing | Print Shop | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter | V · T · E |
| Metal Shop | Lathe | Manual Mill | MaxNCMill | Grizzly G0463 | (Edit) |
JET JET-15 Mill / Drill
Appears to be an older version of the JMD-15 Mill Drill
We have a JET-15 milling machine. The manual is elusive and hard to find online, but we keep a copy in a binder in the metalshop.
It mostly works, however:
- The spindle is prone to overheating and needs to be lubricated somehow.
- There is no spindle brake that we know of, you might want to use a strap wrench to hold onto the spindle while tightening / loosening the drawbar.
Quill feed
[edit | edit source]
To engage or disengage the fine feed, slide the black ring on the quill lever's shaft.
- Pull right to disengage fine feed.
- Push left to engage fine feed. You might need to rotate the handwheel a bit until it meshes with the ring.
Changelog
[edit | edit source]- 21 April 2024: The power plug was not fully enclosed, meaning metal shavings could get in. Replaced the power cable
- 20 April 2024: Removed rust from mill bed, fixed quill feed mechanism