Pogo: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
← Older editNewer edit →
undoⅩ (talk | contribs)
Bureaucrats, confirmed, Administrators
706 edits
VisualWikitext
Ⅹ (talk | contribs)
Bureaucrats, confirmed, Administrators
706 edits
→alarm: fixed erase/write nand * 2
Ⅹ (talk | contribs)
Bureaucrats, confirmed, Administrators
706 edits
Line 100: Line 100:


=== Serial Dump ===
=== Serial Dump ===
==== factory firmware ====
<pre>
<pre>
/ # reboot
/ # reboot
Line 413: Line 414:
[  12.060000] XCE: XCE: LED -> CONNECTED
[  12.060000] XCE: XCE: LED -> CONNECTED
</pre>
</pre>
==== updated firmware ====
<pre>
U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
Pogoplug V4
SoC:  Kirkwood 88F6192_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:  kwsdio: 0
In:    serial
Out:  serial
Err:  serial
Net:  egiga0
Using egiga0 device
ping failed; host 192.168.1.21 is not alive
Hit any key to stop autoboot:  0
MMC rescan: current device # 0 initialized OK
4603624 bytes read in 1209 ms (3.6 MiB/s)
** File not found /boot/uInitrd **
## Booting kernel from Legacy Image at 00800000 ...
  Image Name:  Linux-4.4.34-1-ARCH
  Created:      2016-11-22  9:02:43 UTC
  Image Type:  ARM Linux Kernel Image (uncompressed)
  Data Size:    4603560 Bytes = 4.4 MiB
  Load Address: 00008000
  Entry Point:  00008000
  Verifying Checksum ... OK
  Loading Kernel Image ... OK
Using machid 0xf78 from environment
Starting kernel ...
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.34-1-ARCH (builduser@leming) (gcc version 6.2.1 20160830 (GCC) ) #1 PREEMPT Tue Nov 22 02:02:24 MST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Pogoplug V4
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 119696K/131072K available (6601K kernel code, 547K rwdata, 1876K rodata, 296K init, 725K bss, 11376K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]    vector  : 0xffff0000 - 0xffff1000  (  4 kB)
[    0.000000]    fixmap  : 0xffc00000 - 0xfff00000  (3072 kB)
[    0.000000]    vmalloc : 0xc8800000 - 0xff800000  ( 880 MB)
[    0.000000]    lowmem  : 0xc0000000 - 0xc8000000  ( 128 MB)
[    0.000000]    modules : 0xbf000000 - 0xc0000000  (  16 MB)
[    0.000000]      .text : 0xc0008000 - 0xc084f9dc  (8479 kB)
[    0.000000]      .init : 0xc0850000 - 0xc089a000  ( 296 kB)
[    0.000000]      .data : 0xc089a000 - 0xc0922e0c  ( 548 kB)
[    0.000000]        .bss : 0xc0922e0c - 0xc09d83d8  ( 726 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:114
[    0.000019] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[  24.607041] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[  24.607323] Console: colour dummy device 80x30
[  24.607367] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[  24.697148] pid_max: default: 32768 minimum: 301
[  24.697288] Security Framework initialized
[  24.697396] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[  24.697421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[  24.698543] Initializing cgroup subsys io
[  24.698593] Initializing cgroup subsys memory
[  24.698673] Initializing cgroup subsys devices
[  24.698712] Initializing cgroup subsys freezer
[  24.698744] Initializing cgroup subsys net_cls
[  24.698771] Initializing cgroup subsys perf_event
[  24.698803] Initializing cgroup subsys net_prio
[  24.698926] CPU: Testing write buffer coherency: ok
[  24.699608] Setting up static identity map for 0x81e0 - 0x8238
[  24.702531] devtmpfs: initialized
[  24.706121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[  24.706848] pinctrl core: initialized pinctrl subsystem
[  24.708080] NET: Registered protocol family 16
[  24.708876] DMA: preallocated 256 KiB pool for atomic coherent allocations
[  24.737176] cpuidle: using governor ladder
[  24.767173] cpuidle: using governor menu
[  24.767455] Kirkwood: MV88F6281-A1, TCLK=166666667.
[  24.767491] Feroceon L2: Enabling L2
[  24.767542] Feroceon L2: Cache support initialised.
[  24.770937] Kirkwood PCIe port 0: link down
[  24.770953] PCI: bus0 uses PCIe port 0
[  24.771293] PCI host bridge to bus 0000:00
[  24.771320] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[  24.771337] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[  24.771353] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[  24.771876] PCI: bus0: Fast back to back transfers disabled
[  24.809324] vgaarb: loaded
[  24.809787] SCSI subsystem initialized
[  24.810520] usbcore: registered new interface driver usbfs
[  24.810630] usbcore: registered new interface driver hub
[  24.810716] usbcore: registered new device driver usb
[  24.810967] pps_core: LinuxPPS API ver. 1 registered
[  24.810980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[  24.811030] PTP clock support registered
[  24.812650] clocksource: Switched to clocksource orion_clocksource
[  24.869770] FS-Cache: Loaded
[  24.888649] NET: Registered protocol family 2
[  24.889832] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[  24.889870] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[  24.889899] TCP: Hash tables configured (established 1024 bind 1024)
[  24.890006] UDP hash table entries: 256 (order: 0, 4096 bytes)
[  24.890041] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[  24.890312] NET: Registered protocol family 1
[  24.890780] RPC: Registered named UNIX socket transport module.
[  24.890798] RPC: Registered udp transport module.
[  24.890808] RPC: Registered tcp transport module.
[  24.890818] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  24.893843] futex hash table entries: 256 (order: -1, 3072 bytes)
[  24.912898] VFS: Disk quotas dquot_6.6.0
[  24.913303] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  24.916334] FS-Cache: Netfs 'nfs' registered for caching
[  24.918012] NFS: Registering the id_resolver key type
[  24.918081] Key type id_resolver registered
[  24.918093] Key type id_legacy registered
[  24.918213] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[  24.920150] fuse init (API version 7.23)
[  24.923423] aufs 4.4-20160912
[  24.930981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[  24.931017] io scheduler noop registered
[  24.931038] io scheduler deadline registered
[  24.931433] io scheduler cfq registered
[  24.931827] io scheduler bfq registered (default)
[  24.931839] BFQ I/O-scheduler: v7r11
[  24.932134] mv_xor mv_xor.0: Marvell shared XOR driver
[  24.974593] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[  24.974946] mv_xor mv_xor.1: Marvell shared XOR driver
[  25.014505] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[  25.022781] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[  25.024350] console [ttyS0] disabled
[  25.044438] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[  25.635752] console [ttyS0] enabled
[  25.662529] brd: module loaded
[  25.677004] loop: module loaded
[  25.680645] sata_mv sata_mv.0: cannot get optional clkdev
[  25.686223] sata_mv sata_mv.0: slots 32 ports 1
[  25.693254] scsi host0: sata_mv
[  25.696918] ata1: SATA max UDMA/133 irq 21
[  25.702425] nand: Could not find valid ONFI parameter page; aborting
[  25.708832] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[  25.715211] nand: Hynix NAND 128MiB 3,3V 8-bit
[  25.719637] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[  25.727209] Scanning device for bad blocks
[  25.815163] 5 cmdlinepart partitions found on MTD device orion_nand
[  25.821405] Creating 5 MTD partitions on "orion_nand":
[  25.826552] 0x000000000000-0x000000200000 : "u-boot"
[  25.832220] 0x000000200000-0x000000500000 : "uImage"
[  25.837859] 0x000000500000-0x000000800000 : "uImage2"
[  25.843579] 0x000000800000-0x000001000000 : "failsafe"
[  25.849371] 0x000001000000-0x000008000000 : "root"
[  25.864813] libphy: orion_mdio_bus: probed
[  25.869051] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[  26.042687] ata1: SATA link down (SStatus 0 SControl F300)
[  26.957009] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:03:b9:dc
[  26.965954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  26.972459] ehci-pci: EHCI PCI platform driver
[  26.977025] ehci-orion: EHCI orion driver
[  26.981137] orion-ehci orion-ehci.0: EHCI Host Controller
[  26.986588] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[  26.994352] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[  27.012701] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[  27.020070] hub 1-0:1.0: USB hub found
[  27.023945] hub 1-0:1.0: 1 port detected
[  27.028848] usbcore: registered new interface driver uas
[  27.034407] usbcore: registered new interface driver usb-storage
[  27.040466] usbcore: registered new interface driver ums-alauda
[  27.046501] usbcore: registered new interface driver ums-cypress
[  27.052560] usbcore: registered new interface driver ums-datafab
[  27.058648] usbcore: registered new interface driver ums_eneub6250
[  27.064907] usbcore: registered new interface driver ums-freecom
[  27.070960] usbcore: registered new interface driver ums-isd200
[  27.076959] usbcore: registered new interface driver ums-jumpshot
[  27.083142] usbcore: registered new interface driver ums-karma
[  27.089031] usbcore: registered new interface driver ums-onetouch
[  27.095229] usbcore: registered new interface driver ums-realtek
[  27.101289] usbcore: registered new interface driver ums-sddr09
[  27.107287] usbcore: registered new interface driver ums-sddr55
[  27.113281] usbcore: registered new interface driver ums-usbat
[  27.119732] mousedev: PS/2 mouse device common for all mice
[  28.132690] rtc-mv rtc-mv: internal RTC not ticking
[  28.137752] i2c /dev entries driver
[  28.142096] sdhci: Secure Digital Host Controller Interface driver
[  28.148288] sdhci: Copyright(c) Pierre Ossman
[  28.193000] sdhci-pltfm: SDHCI platform and OF driver helper
[  28.202551] ledtrig-cpu: registered to indicate activity on CPUs
[  28.208808] usbcore: registered new interface driver r8712u
[  28.214813] gre: GRE over IPv4 demultiplexor driver
[  28.219762] NET: Registered protocol family 17
[  28.224435] Key type dns_resolver registered
[  28.233336] registered taskstats version 1
[  28.240032] Key type encrypted registered
[  28.244980] console [netcon0] enabled
[  28.248631] netconsole: network logging started
[  28.253967] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[  28.261088] hctosys: unable to open rtc device (rtc0)
[  28.267876] Waiting 10 sec before mounting root device...
[  28.281203] mmc0: host does not support reading read-only switch, assuming write-enable
[  28.293330] mmc0: new high speed SDHC card at address 0002
[  28.299622] mmcblk0: mmc0:0002 00000 14.9 GiB
[  28.306267]  mmcblk0: p1
[  38.283976] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
[  38.310654] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[  38.318906] VFS: Mounted root (ext3 filesystem) on device 179:1.
[  38.330528] devtmpfs: mounted
[  38.335285] Freeing unused kernel memory: 296K (c0850000 - c089a000)
[  38.368162] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[  38.381252] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.34-1-ARCH #1
[  38.387575] Hardware name: Pogoplug V4
[  38.391349] [<c0010524>] (unwind_backtrace) from [<c000d9d0>] (show_stack+0x10/0x14)
[  38.399072] [<c000d9d0>] (show_stack) from [<c00cd8b4>] (panic+0x88/0x208)
[  38.405938] [<c00cd8b4>] (panic) from [<c0647bc8>] (kernel_init+0xc4/0xe8)
[  38.412790] [<c0647bc8>] (kernel_init) from [<c000a4d0>] (ret_from_fork+0x14/0x24)
[  38.420334] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[  112.842679] random: nonblocking pool is initialized
</pre>
†FAILS to boot from mmc/SD Card

Revision as of 00:18, 7 December 2016

POGO-V4-A1-06

specs

alarm

/ # cd /tmp/
/tmp # wget http://192.168.1.80/pogo/v4/nanddump
/tmp # wget http://192.168.1.80/pogo/v4/nandwrite
/tmp # wget http://192.168.1.80/pogo/v4/flash_erase
/tmp # wget http://192.168.1.80/pogo/v4/fw_printenv
/tmp # wget http://192.168.1.80/pogo/v4/fw_setenv  
/tmp # chmod +x flash_erase fw_printenv fw_setenv nanddump nandwrite
/tmp # mount -o remount,rw /
/tmp # echo "/dev/mtd0 0xc0000 0x20000 0x20000">/etc/fw_env.config

/tmp # wget http://192.168.1.80/pogo/v4/uboot.2014.07-tld-1.pogo_v4.bodhi.tar
/tmp # tar -xf uboot.2014.07-tld-1.pogo_v4.bodhi.tar 
/tmp # /tmp/flash_erase /dev/mtd0 0 4
/tmp # /tmp/nandwrite /dev/mtd0 /tmp/uboot.2014.07-tld-1.pogo_v4.mtd0.kwb

/tmp # wget http://192.168.1.80/pogo/v4/uboot.2014.07-tld-1.environment.img.bodhi.tar
/tmp # tar -xf uboot.2014.07-tld-1.environment.img.bodhi.tar
/tmp # /tmp/flash_erase /dev/mtd0 0xc0000 1
/tmp # /tmp/nandwrite -s 786432 /dev/mtd0 uboot.2014.07-tld-1.environment.img

/tmp # /tmp/fw_setenv ethaddr "$(cat /sys/class/net/eth0/address)"
/tmp # /tmp/fw_printenv ethaddr
/tmp # /tmp/fw_setenv arcNumber 3960
/tmp # /tmp/fw_setenv machid F78    
/tmp # /tmp/fw_setenv usb_rootfstype ext3
/tmp # /tmp/fw_setenv mtdparts 'mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)'
/tmp # /tmp/fw_printenv
/tmp # /tmp/fw_setenv serverip 192.168.1.21
/tmp # /tmp/fw_setenv ipaddr 192.168.1.2   
/tmp # /tmp/fw_setenv if_netconsole 'ping $serverip'
/tmp # /tmp/fw_setenv start_netconsole 'setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;'
/tmp # cd /
/ # wget http://download.doozan.com/uboot/files/uboot/uboot.mtd0.dockstar.original.kwb
/ # /tmp/fw_setenv bootcmd 'run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; run bootcmd_pogo; reset'
/ # /tmp/fw_setenv bootcmd_pogo 'if ubi part root 2048 && ubifsmount ubi:rootfs && ubifsload 0x800000 uboot.mtd0.dockstar.original.kwb ; then go 0x800200; fi'


/ # mknod /tmp/mmcblk0 b 179 0
/ # /sbin/fdisk /tmp/mmcblk0
/tmp/mmcblk0p1               2       22493    15631360  83 Linux
/ # mknod /tmp/mmcblk0p1 b 179 1
/ # cd /tmp
/tmp # wget http://192.168.1.80/pogo/v4/mke2fs        
/tmp # chmod +x mke2fs
/tmp # /tmp/mke2fs -L rootfs -j /tmp/mmcblk0p1
/tmp/mmcblk0p1 is mounted; will not make a filesystem here!
/tmp # mkdir /tmp/mnt
/tmp # mount /tmp/mmcblk0p1 /tmp/mnt
/tmp # cd /tmp/mnt/

/tmp/mnt # wget http://192.168.1.80/pogo/v4/ArchLinuxARM-kirkwood-latest.tar.gz
/tmp/mnt # tar -xzvf ArchLinuxARM-kirkwood-latest.tar.gz
/tmp/mnt # /tmp/fw_setenv bootcmd 'run bootcmd_mmc; run bootcmd_usb; run bootcmd_sata; run bootcmd_pogo; reset'
/tmp/mnt # sync
/tmp/mnt # cd ..
/tmp # umount /tmp/mnt
/tmp # /sbin/reboot

top

/ # top
Mem: 15956K used, 102672K free, 0K shrd, 0K buff, 4028K cached
CPU:  0.0% usr  0.0% sys  0.0% nic  100% idle  0.0% io  0.0% irq  0.0% sirq
Load average: 0.00 0.03 0.00 1/58 672
  PID  PPID USER     STAT   VSZ %MEM CPU %CPU COMMAND
  633   632 root     S     7408  6.2   0  0.0 /usr/local/cloudengines/bin/hbplug
  672   634 root     R     2092  1.7   0  0.0 top
  634     1 root     S     2092  1.7   0  0.0 -/bin/sh
    1     0 root     S     2088  1.7   0  0.0 init
  618     1 root     S     2088  1.7   0  0.0 udhcpc -b -i eth0 -H PogoplugMobil
  632     1 root     S     1672  1.4   0  0.0 /usr/local/cloudengines/bin/hbwd /
    3     2 root     SW<      0  0.0   0  0.0 [ksoftirqd/0]
    5     2 root     SW<      0  0.0   0  0.0 [khelper]
    2     0 root     SW<      0  0.0   0  0.0 [kthreadd]
    4     2 root     SW<      0  0.0   0  0.0 [events/0]
    8     2 root     SW<      0  0.0   0  0.0 [async/mgr]
  106     2 root     SW<      0  0.0   0  0.0 [kblockd/0]
  115     2 root     SW<      0  0.0   0  0.0 [khubd]
  118     2 root     SW<      0  0.0   0  0.0 [kseriod]
  121     2 root     SW<      0  0.0   0  0.0 [kmmcd]
  142     2 root     SW       0  0.0   0  0.0 [crypto]
  143     2 root     SW       0  0.0   0  0.0 [crypto_ret]
  148     2 root     SW       0  0.0   0  0.0 [pdflush]
  149     2 root     SW       0  0.0   0  0.0 [pdflush]
  150     2 root     SW<      0  0.0   0  0.0 [kswapd0]

Serial Dump

factory firmware

/ # reboot
The system is going down NOW!
Sent SIGTERM to all processes
Terminated
Sent SIGKILL to[  386.600000] Restarting system.
[  386.600000] Reseting !! 


U-Boot 1.1.4 (Oct  1 2011 - 12:21:35) Cloud Engines 1.1.2 (3.4.27) PHYADDR=0

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006918B4

Soc: 88F6192 A1 (DDR2)
CPU running @ 800Mhz L2 running @ 400Mhz
SysClock = 200Mhz , TClock = 166Mhz 

DRAM CAS Latency = 3 tRP = 3 tRAS = 8 tRCD=3
DRAM CS[0] base 0x00000000   size 128MB 
DRAM Total size 128MB  16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:128 MB
Flash:  0 kB

CPU : Marvell Feroceon (Rev 1)
CLOUD ENGINES BOARD: PPV4A1

Streaming disabled 
Write allocate disabled


USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0 [PRIME]
Hit any key to stop autoboot:  0 

Loading from NAND 128MB 3,3V 8-bit, offset 0x200000
   Image Name:   Linux-2.6.31.8
   Created:      2011-08-23  20:00:55 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2080956 Bytes =  2 MB
   Load Address: 00008000
   Entry Point:  00008000
## Booting image at 00800000 ...
   Image Name:   Linux-2.6.31.8
   Created:      2011-08-23  20:00:55 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2080956 Bytes =  2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux..................................................................................................................................... done, booting the kernel.
[    0.000000] Linux version 2.6.31.8 (afenn@kt) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #4 Tue Aug 23 13:00:50 PDT 2011
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Feroceon-KW
[    0.000000] Using UBoot passing parameters structure
[    0.000000] Ignoring unrecognised tag 0x41004345
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=4,2048 rootfstype=ubifs
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 118356KB available (3852K code, 261K data, 124K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:128
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[    0.230000] Mount-cache hash table entries: 512
[    0.230000] CPU: Testing write buffer coherency: ok
[    0.230000] NET: Registered protocol family 16
[    0.230000] Feroceon L2: Enabling L2
[    0.230000] Feroceon L2: Cache support initialised.
[    0.230000] 
[    0.230000] CPU Interface
[    0.230000] -------------
[    0.230000] SDRAM_CS0 ....base 00000000, size 128MB 
[    0.230000] SDRAM_CS1 ....disable
[    0.230000] SDRAM_CS2 ....disable
[    0.230000] SDRAM_CS3 ....disable
[    0.230000] PEX0_MEM ....base e0000000, size 128MB 
[    0.230000] PEX0_IO ....base f2000000, size   1MB 
[    0.230000] PEX1_MEM ....no such
[    0.230000] PEX1_IO ....no such
[    0.230000] INTER_REGS ....base f1000000, size   1MB 
[    0.230000] NFLASH_CS ....base fa000000, size   2MB 
[    0.230000] SPI_CS ....base f4000000, size  16MB 
[    0.230000] BOOT_ROM_CS ....no such
[    0.230000] DEV_BOOTCS ....no such
[    0.230000] CRYPT_ENG ....base f0000000, size   2MB 
[    0.230000] 
[    0.230000]   Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- RD-88F6192A-NAS  Soc: 88F6192 A1 LE
[    0.230000] 
[    0.230000]  Detected Tclk 166666667 and SysClk 200000000 
[    0.230000] Marvell USB EHCI Host controller #0: c403e740
[    0.730000] PEX0 interface detected no Link.
[    0.730000] PCI: bus0: Fast back to back transfers enabled
[    0.730000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
[    0.750000] bio: create slab <bio-0> at 0
[    0.750000] SCSI subsystem initialized
[    0.750000] usbcore: registered new interface driver usbfs
[    0.750000] usbcore: registered new interface driver hub
[    0.750000] usbcore: registered new device driver usb
[    0.750000] NET: Registered protocol family 2
[    0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.750000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.750000] TCP reno registered
[    0.750000] NET: Registered protocol family 1
[    0.750000] cpufreq: Init kirkwood cpufreq driver
[    0.760000] XOR registered 4 channels
[    0.760000] XOR 2nd invalidate WA enabled
[    0.760000] cesadev_init(c000d7fc)
[    0.760000] mvCesaInit: sessions=640, queue=64, pSram=f0000000
[    0.760000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.770000] msgmni has been set to 231
[    0.770000] alg: No test for cipher_null (cipher_null-generic)
[    0.770000] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[    0.770000] alg: No test for digest_null (digest_null-generic)
[    0.770000] alg: No test for compress_null (compress_null-generic)
[    0.780000] alg: No test for stdrng (krng)
[    0.780000] alg: No test for hmac(digest_null) (hmac(digest_null-generic))
[    0.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.790000] io scheduler noop registered
[    0.790000] io scheduler anticipatory registered (default)
[    0.790000] Initializing ths8200_init
[    0.790000] Initializing dove_adi9889_init
[    0.810000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.810000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[    0.810000] console [ttyS0] enabled
[    0.820000] Integrated Sata device found
[    0.830000] IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
[    0.850000] scsi0 : Marvell SCSI to SATA adapter
[    0.860000] scsi1 : Marvell SCSI to SATA adapter
[    0.870000] Loading Marvell Ethernet Driver:
[    0.870000]   o Cached descriptors in DRAM
[    0.880000]   o DRAM SW cache-coherency
[    0.880000]   o 1 Giga ports supported
[    0.880000]   o Single RX Queue support - ETH_DEF_RXQ=0
[    0.890000]   o Single TX Queue support - ETH_DEF_TXQ=0
[    0.890000]   o TCP segmentation offload (TSO) supported
[    0.900000]   o Large Receive offload (LRO) supported
[    0.900000]   o Receive checksum offload supported
[    0.910000]   o Transmit checksum offload supported
[    0.910000]   o Network Fast Processing (Routing) supported - (Disabled)
[    0.920000]   o Driver ERROR statistics enabled
[    0.930000]   o Proc tool API enabled
[    0.930000]   o SKB Reuse supported - (Disabled)
[    0.930000]   o SKB Recycle supported - (Disabled)
[    0.940000]   o Rx descripors: q0=128
[    0.940000]   o Tx descripors: q0=532
[    0.950000]   o Loading network interface(s):
[    0.950000]      o register under mv88fx_eth platform
[    0.960000]      o eth0, ifindex = 2, GbE port = 0
[    0.960000] 
[    0.960000] mvFpRuleDb (c45b3000): 1024 entries, 4096 bytes
[    0.970000] Counter=0, opIdx=6, overhead=16
[    0.970000] Counter=1, opIdx=2, overhead=0
[    0.980000] Counter=2, opIdx=1, overhead=18
[    0.980000] Counter=3, opIdx=2, overhead=0
[    0.990000] tun: Universal TUN/TAP device driver, 1.6
[    0.990000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.000000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    1.010000] Scanning device for bad blocks
[    1.060000] Using static partition definition
[    1.060000] Creating 5 MTD partitions on "nand_mtd":
[    1.070000] 0x000000000000-0x000000200000 : "u-boot"
[    1.070000] 0x000000200000-0x000000500000 : "uImage"
[    1.080000] 0x000000500000-0x000000800000 : "uImage2"
[    1.080000] 0x000000800000-0x000001000000 : "failsafe"
[    1.090000] 0x000001000000-0x000008000000 : "root"
[    1.100000] UBI: attaching mtd4 to ubi0
[    1.100000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    1.110000] UBI: logical eraseblock size:    126976 bytes
[    1.110000] UBI: smallest flash I/O unit:    2048
[    1.120000] UBI: sub-page size:              512
[    1.120000] UBI: VID header offset:          2048 (aligned 2048)
[    1.130000] UBI: data offset:                4096
[    1.350000] UBI: attached mtd4 to ubi0
[    1.360000] UBI: MTD device name:            "root"
[    1.360000] UBI: MTD device size:            112 MiB
[    1.360000] UBI: number of good PEBs:        896
[    1.370000] UBI: number of bad PEBs:         0
[    1.370000] UBI: max. allowed volumes:       128
[    1.380000] UBI: wear-leveling threshold:    4096
[    1.380000] UBI: number of internal volumes: 1
[    1.390000] UBI: number of user volumes:     1
[    1.390000] UBI: available PEBs:             0
[    1.400000] UBI: total number of reserved PEBs: 896
[    1.400000] UBI: number of PEBs reserved for bad PEB handling: 8
[    1.410000] UBI: max/mean erase counter: 1/0
[    1.410000] UBI: image sequence number: 0
[    1.420000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.420000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
[    1.430000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
[    1.440000] UBI: background thread "ubi_bgt0d" started, PID 451
[    1.470000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
[    1.490000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
[    1.490000] usb usb1: configuration #1 chosen from 1 choice
[    1.500000] hub 1-0:1.0: USB hub found
[    1.500000] hub 1-0:1.0: 1 port detected
[    1.510000] Initializing USB Mass Storage driver...
[    1.510000] usbcore: registered new interface driver usb-storage
[    1.520000] USB Mass Storage support registered.
[    1.520000] usbcore: registered new interface driver ums-datafab
[    1.530000] usbcore: registered new interface driver ums-freecom
[    1.530000] usbcore: registered new interface driver ums-jumpshot
[    1.540000] usbcore: registered new interface driver ums-sddr09
[    1.550000] usbcore: registered new interface driver ums-sddr55
[    1.550000] usbcore: registered new interface driver ums-usbat
[    1.560000] mice: PS/2 mouse device common for all mice
[    1.560000] i2c /dev entries driver
[    1.580000] sdhci: Secure Digital Host Controller Interface driver
[    1.580000] sdhci: Copyright(c) Pierre Ossman
[    1.590000] mmc0: mvsdio driver initialized, using GPIO 27 for card detection
[    1.600000] usbcore: registered new interface driver usbhid
[    1.600000] usbhid: v2.6:USB HID core driver
[    1.610000] TCP cubic registered
[    1.610000] NET: Registered protocol family 17
[    1.620000] RPC: Registered udp transport module.
[    1.620000] RPC: Registered tcp transport module.
[    1.630000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.760000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.760000] UBIFS: file system size:   110850048 bytes (108252 KiB, 105 MiB, 873 LEBs)
[    1.770000] UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
[    1.780000] UBIFS: media format:       w4/r0 (latest is w4/r0)
[    1.780000] UBIFS: default compressor: lzo
[    1.790000] UBIFS: reserved for root:  0 bytes (0 KiB)
[    1.790000] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.800000] Freeing init memory: 124K
[    3.870000] eth0: link up, full duplex, speed 100 Mbps
[    3.870000] eth0: started
udhcpc (v1.16.1) started
HWADDR 00 0x25 0x31 0x03 0xb9 0xdc
PIP0 185
PIP1 220
cat: can't open '/etc/resolv.conf': No such file or directory
route: SIOCDELRT: No such process
grep: /etc/resolv.conf: No such file or directory
Sending discover...
Sending select for 192.168.1.101...
Lease of 192.168.1.101 obtained, lease time 86400
HWADDR 00 0x25 0x31 0x03 0xb9 0xdc
PIP0 185
PIP1 220
route: SIOCDELRT: No such process
modprobe: module 'vfat' not found
[    6.040000] ufsd: module license 'Commercial product' taints kernel.
[    6.050000] Disabling lock debugging due to kernel taint
[    6.080000] ufsd: driver 8.5 (NTFS4LINUX_U85_017_S[2011-08-17-16:51:48]) LBD=ON with delayalloc with ioctl loaded at bf000000
[    6.080000] NTFS support included
[    6.080000] Hfs+/HfsX support included
[    6.080000] For 'CloudEngines_PogoPlug_2011-08-03'
Loading rt3070sta.ko:        [    6.410000] rtusb init rt2870 --->
[    6.420000] usbcore: registered new interface driver rt2870
Success
Loading xce.ko:              [    6.450000] Cloud Engines XCE Init [Version: 3.1.99.12]
[    6.450000] XCE: CPU MEMORY MAP:
[    6.450000] XCE:   -- 0x00001000 - 0xbeffffff (3055 MB)  User Space Mappings
[    6.460000] XCE:   -- 0xbf000000 - 0xbfffffff (  16 MB)  Kernel module space
[    6.470000] XCE:   -- 0xc0000000 - 0xc7ffffff ( 128 MB)  Kernel direct-mapped ram
[    6.480000] XCE:   -- 0xc8800000 - 0xe7ffffff ( 504 MB)  Kernel vmalloc space
[    6.480000] XCE:   -- 0xe8000000 - 0xfeffffff ( 367 MB)  Kernel platform space
[    6.490000] XCE: CPU FEATURES:
[    6.490000] XCE:   -- I Cache:         enabled
[    6.500000] XCE:   -- D Cache:         enabled
[    6.500000] XCE:   -- Branch Predict:  disabled
[    6.510000] XCE:   -- MMU:             enabled
[    6.510000] XCE:   -- Alignment Abort: enabled
[    6.520000] XCE: BLPARAMS:   -- Loading properties [c4d11efc].
[    6.530000] XCE: BLPARAMS:   -- MTD @ [c45b7c00].
[    6.530000] XCE: BLPARAMS: Locating parameter block...
[    6.540000] XCE: BLPARAMS: reading 2048 bytes @ a0000
[    6.540000] XCE: Loaded Property Size: 2048
[    6.550000] XCE:    - 'cesvcid' -> 'KWNELFZHYJLJBWULXMJ927UX96'
[    6.550000] XCE:    - 'ceboardver' -> 'PPV4A1'
[    6.560000] XCE:   -- ICache Prefetch: enabled
[    6.560000] XCE:   -- DCache Prefetch: enabled
[    6.570000] XCE:   -- L2 Cache:        enabled
[    6.570000] XCE:   -- L2 Prefetch:     disabled
[    6.580000] XCE:   -- L2 Writethrough: disabled
[    6.580000] XCE:   -- Write Allocate:  disabled
[    6.590000] XCE:   -- Streaming:       disabled
[    6.590000] XCE: Current GPIO State:
[    6.590000] XCE:  GPIO L OUT:    0x01e18400
[    6.600000] XCE:  GPIO L OE:     0xfe004800
[    6.600000] XCE:  GPIO L BLINK:  0x00000000
[    6.610000] XCE:  GPIO L POL:    0x08000000
[    6.610000] XCE:  GPIO L IN:     0x31e00000
[    6.610000] XCE:  GPIO H OUT:    0x00000008
[    6.620000] XCE:  GPIO H OE:     0x00000005
[    6.620000] XCE:  GPIO H BLINK:  0x00000000
[    6.630000] XCE:  GPIO H POL:    0x00000000
[    6.630000] XCE:  GPIO H IN:     0x00000008
Success
Starting hbplug:             Success
/ # [    6.720000] XCE: BLPARAMS:   -- Loading properties [c4b7becc].
[    6.730000] XCE: BLPARAMS:   -- MTD @ [c45b7c00].
[    6.730000] XCE: BLPARAMS: Locating parameter block...
[    6.740000] XCE: BLPARAMS: reading 2048 bytes @ a0000
[    6.740000] XCE: BLPARAMS: reading 2048 bytes @ a0800
[    6.750000] XCE: BLPARAMS: reading 2048 bytes @ a1000
[    6.760000] XCE: BLPARAMS: reading 2048 bytes @ a1800
[   12.060000] XCE: XCE: LED -> CONNECTED

updated firmware

U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:59:45)
Pogoplug V4

SoC:   Kirkwood 88F6192_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  128 MiB
MMC:   kwsdio: 0
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Using egiga0 device
ping failed; host 192.168.1.21 is not alive
Hit any key to stop autoboot:  0 

MMC rescan: current device # 0 initialized OK
4603624 bytes read in 1209 ms (3.6 MiB/s)
** File not found /boot/uInitrd **
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-4.4.34-1-ARCH
   Created:      2016-11-22   9:02:43 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4603560 Bytes = 4.4 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
Using machid 0xf78 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.34-1-ARCH (builduser@leming) (gcc version 6.2.1 20160830 (GCC) ) #1 PREEMPT Tue Nov 22 02:02:24 MST 2016
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Pogoplug V4
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 119696K/131072K available (6601K kernel code, 547K rwdata, 1876K rodata, 296K init, 725K bss, 11376K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc084f9dc   (8479 kB)
[    0.000000]       .init : 0xc0850000 - 0xc089a000   ( 296 kB)
[    0.000000]       .data : 0xc089a000 - 0xc0922e0c   ( 548 kB)
[    0.000000]        .bss : 0xc0922e0c - 0xc09d83d8   ( 726 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:114
[    0.000019] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[   24.607041] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[   24.607323] Console: colour dummy device 80x30
[   24.607367] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
[   24.697148] pid_max: default: 32768 minimum: 301
[   24.697288] Security Framework initialized
[   24.697396] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   24.697421] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[   24.698543] Initializing cgroup subsys io
[   24.698593] Initializing cgroup subsys memory
[   24.698673] Initializing cgroup subsys devices
[   24.698712] Initializing cgroup subsys freezer
[   24.698744] Initializing cgroup subsys net_cls
[   24.698771] Initializing cgroup subsys perf_event
[   24.698803] Initializing cgroup subsys net_prio
[   24.698926] CPU: Testing write buffer coherency: ok
[   24.699608] Setting up static identity map for 0x81e0 - 0x8238
[   24.702531] devtmpfs: initialized
[   24.706121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[   24.706848] pinctrl core: initialized pinctrl subsystem
[   24.708080] NET: Registered protocol family 16
[   24.708876] DMA: preallocated 256 KiB pool for atomic coherent allocations
[   24.737176] cpuidle: using governor ladder
[   24.767173] cpuidle: using governor menu
[   24.767455] Kirkwood: MV88F6281-A1, TCLK=166666667.
[   24.767491] Feroceon L2: Enabling L2
[   24.767542] Feroceon L2: Cache support initialised.
[   24.770937] Kirkwood PCIe port 0: link down
[   24.770953] PCI: bus0 uses PCIe port 0
[   24.771293] PCI host bridge to bus 0000:00
[   24.771320] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[   24.771337] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[   24.771353] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   24.771876] PCI: bus0: Fast back to back transfers disabled
[   24.809324] vgaarb: loaded
[   24.809787] SCSI subsystem initialized
[   24.810520] usbcore: registered new interface driver usbfs
[   24.810630] usbcore: registered new interface driver hub
[   24.810716] usbcore: registered new device driver usb
[   24.810967] pps_core: LinuxPPS API ver. 1 registered
[   24.810980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   24.811030] PTP clock support registered
[   24.812650] clocksource: Switched to clocksource orion_clocksource
[   24.869770] FS-Cache: Loaded
[   24.888649] NET: Registered protocol family 2
[   24.889832] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   24.889870] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   24.889899] TCP: Hash tables configured (established 1024 bind 1024)
[   24.890006] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   24.890041] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   24.890312] NET: Registered protocol family 1
[   24.890780] RPC: Registered named UNIX socket transport module.
[   24.890798] RPC: Registered udp transport module.
[   24.890808] RPC: Registered tcp transport module.
[   24.890818] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.893843] futex hash table entries: 256 (order: -1, 3072 bytes)
[   24.912898] VFS: Disk quotas dquot_6.6.0
[   24.913303] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   24.916334] FS-Cache: Netfs 'nfs' registered for caching
[   24.918012] NFS: Registering the id_resolver key type
[   24.918081] Key type id_resolver registered
[   24.918093] Key type id_legacy registered
[   24.918213] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[   24.920150] fuse init (API version 7.23)
[   24.923423] aufs 4.4-20160912
[   24.930981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[   24.931017] io scheduler noop registered
[   24.931038] io scheduler deadline registered
[   24.931433] io scheduler cfq registered
[   24.931827] io scheduler bfq registered (default)
[   24.931839] BFQ I/O-scheduler: v7r11
[   24.932134] mv_xor mv_xor.0: Marvell shared XOR driver
[   24.974593] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[   24.974946] mv_xor mv_xor.1: Marvell shared XOR driver
[   25.014505] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[   25.022781] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   25.024350] console [ttyS0] disabled
[   25.044438] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 10416666) is a 16550A
[   25.635752] console [ttyS0] enabled
[   25.662529] brd: module loaded
[   25.677004] loop: module loaded
[   25.680645] sata_mv sata_mv.0: cannot get optional clkdev
[   25.686223] sata_mv sata_mv.0: slots 32 ports 1
[   25.693254] scsi host0: sata_mv
[   25.696918] ata1: SATA max UDMA/133 irq 21
[   25.702425] nand: Could not find valid ONFI parameter page; aborting
[   25.708832] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[   25.715211] nand: Hynix NAND 128MiB 3,3V 8-bit
[   25.719637] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   25.727209] Scanning device for bad blocks
[   25.815163] 5 cmdlinepart partitions found on MTD device orion_nand
[   25.821405] Creating 5 MTD partitions on "orion_nand":
[   25.826552] 0x000000000000-0x000000200000 : "u-boot"
[   25.832220] 0x000000200000-0x000000500000 : "uImage"
[   25.837859] 0x000000500000-0x000000800000 : "uImage2"
[   25.843579] 0x000000800000-0x000001000000 : "failsafe"
[   25.849371] 0x000001000000-0x000008000000 : "root"
[   25.864813] libphy: orion_mdio_bus: probed
[   25.869051] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   26.042687] ata1: SATA link down (SStatus 0 SControl F300)
[   26.957009] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:03:b9:dc
[   26.965954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   26.972459] ehci-pci: EHCI PCI platform driver
[   26.977025] ehci-orion: EHCI orion driver
[   26.981137] orion-ehci orion-ehci.0: EHCI Host Controller
[   26.986588] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   26.994352] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   27.012701] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   27.020070] hub 1-0:1.0: USB hub found
[   27.023945] hub 1-0:1.0: 1 port detected
[   27.028848] usbcore: registered new interface driver uas
[   27.034407] usbcore: registered new interface driver usb-storage
[   27.040466] usbcore: registered new interface driver ums-alauda
[   27.046501] usbcore: registered new interface driver ums-cypress
[   27.052560] usbcore: registered new interface driver ums-datafab
[   27.058648] usbcore: registered new interface driver ums_eneub6250
[   27.064907] usbcore: registered new interface driver ums-freecom
[   27.070960] usbcore: registered new interface driver ums-isd200
[   27.076959] usbcore: registered new interface driver ums-jumpshot
[   27.083142] usbcore: registered new interface driver ums-karma
[   27.089031] usbcore: registered new interface driver ums-onetouch
[   27.095229] usbcore: registered new interface driver ums-realtek
[   27.101289] usbcore: registered new interface driver ums-sddr09
[   27.107287] usbcore: registered new interface driver ums-sddr55
[   27.113281] usbcore: registered new interface driver ums-usbat
[   27.119732] mousedev: PS/2 mouse device common for all mice
[   28.132690] rtc-mv rtc-mv: internal RTC not ticking
[   28.137752] i2c /dev entries driver
[   28.142096] sdhci: Secure Digital Host Controller Interface driver
[   28.148288] sdhci: Copyright(c) Pierre Ossman
[   28.193000] sdhci-pltfm: SDHCI platform and OF driver helper
[   28.202551] ledtrig-cpu: registered to indicate activity on CPUs
[   28.208808] usbcore: registered new interface driver r8712u
[   28.214813] gre: GRE over IPv4 demultiplexor driver
[   28.219762] NET: Registered protocol family 17
[   28.224435] Key type dns_resolver registered
[   28.233336] registered taskstats version 1
[   28.240032] Key type encrypted registered
[   28.244980] console [netcon0] enabled
[   28.248631] netconsole: network logging started
[   28.253967] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   28.261088] hctosys: unable to open rtc device (rtc0)
[   28.267876] Waiting 10 sec before mounting root device...
[   28.281203] mmc0: host does not support reading read-only switch, assuming write-enable
[   28.293330] mmc0: new high speed SDHC card at address 0002
[   28.299622] mmcblk0: mmc0:0002 00000 14.9 GiB 
[   28.306267]  mmcblk0: p1
[   38.283976] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
[   38.310654] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[   38.318906] VFS: Mounted root (ext3 filesystem) on device 179:1.
[   38.330528] devtmpfs: mounted
[   38.335285] Freeing unused kernel memory: 296K (c0850000 - c089a000)
[   38.368162] Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[   38.381252] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.34-1-ARCH #1
[   38.387575] Hardware name: Pogoplug V4
[   38.391349] [<c0010524>] (unwind_backtrace) from [<c000d9d0>] (show_stack+0x10/0x14)
[   38.399072] [<c000d9d0>] (show_stack) from [<c00cd8b4>] (panic+0x88/0x208)
[   38.405938] [<c00cd8b4>] (panic) from [<c0647bc8>] (kernel_init+0xc4/0xe8)
[   38.412790] [<c0647bc8>] (kernel_init) from [<c000a4d0>] (ret_from_fork+0x14/0x24)
[   38.420334] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[  112.842679] random: nonblocking pool is initialized

†FAILS to boot from mmc/SD Card

Retrieved from "https://main-wiki.extremist.software/index.php?title=Pogo&oldid=55558"