Sparky: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 16: | Line 16: | ||
* POE support | * POE support | ||
* 4.5-18V | * 4.5-18V | ||
[http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Meraki Source] | |||
=== Specs === | |||
* Atheros AR2317@180Mhz | |||
* 32 MB RAM | |||
* 8 MB Flash | |||
* 802.11B/G | |||
* POE support | |||
* 4.5-18V | |||
[http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Meraki Source] | [http://www.dd-wrt.com/wiki/index.php/Supported_Devices#Meraki Source] | ||
==== Radio ==== | |||
* 200 mW (23 dBm) peak transmission power* | |||
* Enhanced receive sensitivity | |||
* External RP-SMA connector | |||
* 802.11 b/g (1 - 54 Mbps) | |||
* 2 dBi omni-directional antenna included | |||
==== Power ==== | |||
* 5 - 22 V DC | |||
* Power Over Ethernet, 12 - 22 V (non 802.3af ) | |||
* Power consumption: 12 W max; 3 W typical | |||
* 15 V/0.8 A DC power adapter included | |||
* Power Over Ethernet injector included | |||
==== Environment ==== | |||
* Operating temperature: 14° F – 122° F (-10° C – 50° C) | |||
* IP - 66 environmental rating | |||
==== Interfaces / Ports ==== | |||
* Two 10/100 Mbps auto-crossover Ethernet ports: | |||
automatically detects PC or gateway operation | |||
* Signal strength LED | |||
Source: Meraki Data Sheet [https://meraki.cisco.com/lib/pdf/meraki_datasheet_outdoor.pdf] | |||
=== Manuals === | === Manuals === | ||
* https://meraki.cisco.com/lib/pdf/meraki_setup_outdoor.pdf | * https://meraki.cisco.com/lib/pdf/meraki_setup_outdoor.pdf | ||
Revision as of 22:53, 29 November 2013
The donation
A bunch of Meraki Outdoor "Sparky" units were donated to Noisebridge.
MIT Article referring to a "SF Mesh" http://www.technologyreview.com/hack/410322/meraki-outdoor/
Documentation
Specs
- Atheros AR2317@180Mhz
- 32 MB RAM
- 8 MB Flash
- 802.11B/G
- POE support
- 4.5-18V
Specs
- Atheros AR2317@180Mhz
- 32 MB RAM
- 8 MB Flash
- 802.11B/G
- POE support
- 4.5-18V
Radio
- 200 mW (23 dBm) peak transmission power*
- Enhanced receive sensitivity
- External RP-SMA connector
- 802.11 b/g (1 - 54 Mbps)
- 2 dBi omni-directional antenna included
Power
- 5 - 22 V DC
- Power Over Ethernet, 12 - 22 V (non 802.3af )
- Power consumption: 12 W max; 3 W typical
- 15 V/0.8 A DC power adapter included
- Power Over Ethernet injector included
Environment
- Operating temperature: 14° F – 122° F (-10° C – 50° C)
- IP - 66 environmental rating
Interfaces / Ports
- Two 10/100 Mbps auto-crossover Ethernet ports:
automatically detects PC or gateway operation
- Signal strength LED
Source: Meraki Data Sheet [1]
Manuals
Components
Where projects are the units going to?
- Dana wants to take 20 units for a community project (I'm in possession of 14 units as of 2013.11.27. If any go unused I will return them for other uses. ~ dana)
- Sudoroom is interested in all the units for their open mesh networking project.
- Dan would like at least 1 outdoor version and 5-10 boards to provide wifi in the Mission around Noisebridge. https://openwireless.org nodes
- Adrian wants several to improve Atheros support in FreeBSD
- Jof wants boards for mesh testing
- J.C. has 2 boards for testing.