G1226: Difference between revisions
Jump to navigation
Jump to search
Graphics LCD #660 |
pinouts as tested #660 |
||
| Line 28: | Line 28: | ||
Pinout: | Pinout: | ||
<pre> | <pre> | ||
1. | 1. Vcc (+5v) | ||
2. | 2. Ground | ||
3. | 3. Vlc (LCD negative bias) | ||
4. | 4. D0 (data bus) | ||
5. | 5. D1 " " | ||
6. | 6. D2 " " | ||
7. | 7. D3 " " | ||
8. | 8. D4 " " | ||
9. | 9. D5 " " | ||
10. | 10. D6 " " | ||
11. | 11. D7 " " | ||
12. | 12. CS1 (Chip select left) | ||
13. | 13. CS2 (Chip select right) | ||
14. | 14. Reset | ||
15. | 15. R/W | ||
16. | 16. RS | ||
17. | 17. E | ||
18. | 18. Chassis ground | ||
19. | 19. LED + Backlight (+5v w/10ohm resistor) | ||
20. | 20. LED - Backlight | ||
* All pinouts verified by continuity check with KS0108B and LED Backlight terminals | |||
</pre> | </pre> | ||
Revision as of 11:34, 10 May 2016
Seiko LCD Module 128 x 64
Monochrome graphics display with backlight and built-in RAM.
Size: 93.0 x 70.0 x 11.4 mm Viewing Area: 70.7 x 38.8 mm Dot size: 0.44 x 0.44 mm Dot pitch: 0.48 x 0.48 mm
Voltage: 5.0 DC Current: 5 mA
LED Backlight coltage: 4.1 DC LED Backlight current: 125 mA
Part No: G1226B1J000S
Data Sheet: http://pdf.datasheetcatalog.com/datasheets2/95/951116_1.pdf
On the back of the module are two 64 channel LCD segment drivers (KS0108B) and a 64 common driver (KS0107).
Data Sheet: https://www.sparkfun.com/datasheets/LCD/ks0108b.pdf
Pinout:
1. Vcc (+5v) 2. Ground 3. Vlc (LCD negative bias) 4. D0 (data bus) 5. D1 " " 6. D2 " " 7. D3 " " 8. D4 " " 9. D5 " " 10. D6 " " 11. D7 " " 12. CS1 (Chip select left) 13. CS2 (Chip select right) 14. Reset 15. R/W 16. RS 17. E 18. Chassis ground 19. LED + Backlight (+5v w/10ohm resistor) 20. LED - Backlight * All pinouts verified by continuity check with KS0108B and LED Backlight terminals