Laser Gallery: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
m Reverted edits by Arnady (talk) to last revision by Scotty
No edit summary
Line 1: Line 1:
[[Image:Living_hinges.jpg|thumb|center|upright=5|alt=box with living hinges|box with living hinges]]
[[Image:Etch_portrait.jpg|thumb|center|upright=5|alt=portrait etch test|portrait etch test]]
[[Image:Etch_test.jpg|thumb|center|upright=5|alt=etch test|etch test]]
[[Image:Cardboard_monitor.jpg|thumb|center|upright=5|alt=cardboard monitor|cardboard monitor]]
[[Image:Plastic_pikachu.jpg|thumb|center|upright=5|alt=acrylic etched pikachu|acrylic etched pikachu for poker chip tricks]]
[[Image:Wood_pikachu.jpg|thumb|center|upright=5|alt=wood etched pikachu|wood etched pikachu]]
[[Image:Cardboard_mobile.jpg|thumb|center|upright=5|alt=laser cut cardboard mobile|Laser cut cardboard Noisebridge mobiles File: https://gist.github.com/scottyallen/1888e058261fc21f184f6be192bbe131
[[Image:Cardboard_mobile.jpg|thumb|center|upright=5|alt=laser cut cardboard mobile|Laser cut cardboard Noisebridge mobiles File: https://gist.github.com/scottyallen/1888e058261fc21f184f6be192bbe131
|400px]]   
|400px]]   

Revision as of 00:29, 2 September 2016

box with living hinges
box with living hinges
portrait etch test
portrait etch test
etch test
etch test
cardboard monitor
cardboard monitor
acrylic etched pikachu
acrylic etched pikachu for poker chip tricks
wood etched pikachu
wood etched pikachu
laser cut cardboard mobile
Laser cut cardboard Noisebridge mobiles File: https://gist.github.com/scottyallen/1888e058261fc21f184f6be192bbe131
Storage box
Storage box assembled without glue. Scotty: "Seems like .4mm kerf is the magic number in fusion 360 to get snug enough fit that you can hammer it together with a mallet" File: https://gist.github.com/scottyallen/b244dc3fedcbf2862847adce4e4c9d2f
wood springs
Wood springs
cardboard laser cutting test front side
Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed.
cardboard laser cutting test back side
Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed. Note how the back is not cut through all the way on some tests.