Epson SureColor T5270D: Difference between revisions
Added another possible generic-driver route. |
Updated workingness status. |
||
| Line 1: | Line 1: | ||
This is the 36-inch-wide dual-roll large-format inkjet printer between the SparkleForge and the [[Sewing]] station. | This is the 36-inch-wide dual-roll large-format inkjet printer between the SparkleForge and the [[Sewing]] station. | ||
'''Working''' as of 2019-05-02. | |||
Ink for this printer is ''very'' expensive, so please do drop some cash in a nearby cash box if you print something on this printer. If you forgot to or didn't have cash, you can [https://donate.noisebridge.net/projects/printer donate electronically]. | Ink for this printer is ''very'' expensive, so please do drop some cash in a nearby cash box if you print something on this printer. If you forgot to or didn't have cash, you can [https://donate.noisebridge.net/projects/printer donate electronically]. | ||
Revision as of 07:44, 3 May 2019
This is the 36-inch-wide dual-roll large-format inkjet printer between the SparkleForge and the Sewing station.
Working as of 2019-05-02.
Ink for this printer is very expensive, so please do drop some cash in a nearby cash box if you print something on this printer. If you forgot to or didn't have cash, you can donate electronically.
Using this printer
The printer can be reached via USB or hard Ethernet (no Wi-Fi). BYO cable.
On USB, the printer requires a driver. It may work (untested) with a generic HPGL or ESC/P driver.
On Ethernet, you can upload files to the printer and it'll print them without requiring a driver. (But you need a computer or device that speaks Ethernet, and a web browser that can talk to the printer and upload files. FTP might also work but is undocumented outside of a couple of passing mentions.)
Ethernet requires a crossover cable, or possibly a router. Connecting directly with a straight-through cable does not seem to work.
It's unclear how to get the printer to cut the paper automatically at the end of a job. If the job appears complete and the print head just starts going back and forth without printing anything or advancing the paper, cancel the job on the printer's control panel. The printer will feed about an inch of paper and then cut, and you'll have your print.
Queue of known current or impending resupply needs
- Roll paper (36-inch): The roll is exhausted. There's just under two feet of loose paper sitting on top of the machine, but the machine refuses to load it, even as a “Cut Sheet”. We need a new roll.
- -1 used cartridge: We have at least one used-up cartridge that needs to find a home. Ideally this should be disposed of in a way that the remaining dregs of ink get recycled and Noisebridge gets a kickback.
- Photo black: Currently the lowest cartridge. We have a replacement on hand.
Resources
- Manual: https://files.support.epson.com/docid/cpd4/cpd41582.pdf
- Ink: https://epson.com/i/SCT5270DR
- Cutter cartridge: https://epson.com/Accessories/Printer-Accessories/Replacement-Printer-Cutter-Blade/p/S902006
- Ink “maintenance” (disposal) tank: https://epson.com/Accessories/Printer-Accessories/Replacement-Ink-Maintenance-Tank/p/T619300
- The printer also consumes 36-inch-wide roll paper. This comes in various weights, of which the lightest and cheapest is bond.