Gate: Difference between revisions
No edit summary |
|||
| Line 47: | Line 47: | ||
|} | |} | ||
Added to this, the red LED and front buzzer share a signal wire. Green and yellow are used for these. The [[wp:LED]] has bias, a correct direction. The buzzer, phone earpiece, is driven directly by the arduino, using a tone generation library. | Added to this, the red LED and front buzzer share a signal wire pair. Green and yellow are used for these. The [[wp:LED]] has bias, a correct direction. The buzzer, phone earpiece, is driven directly by the arduino, using a tone generation library. | ||
The last 2 white wires are reserved for future use supporting voice from the phone. | The last 2 white wires are reserved for future use supporting voice from the phone. | ||
Revision as of 18:01, 27 June 2023
| Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Stuff | Events | Projects | Meetings | Donate | E |
| 272 Capp St. | Layout | Exits | Bathrooms | Network | Audio | AV | Construction | Electrical | Storage STREET | Patio | Parking | Fence | Access | Gate | Payphone | Doorbell | Back patio | Roof | Neighbors |
E |
| Access | Gate | Front Door | Doorbell | RFID Token | Payphone | Security Camera | SecWG | Olympus (Door) | V · T · E |
| You are standing at Noisebridge's locked front gate through the fence around the Patio to the east.
You see a red doorbell buzzer button, an RFID Token reader and Payphone keypad. EXITS: To the west is the parking spaces and to the south is the Street. > |
Noisebridge's front gate is in our parking lot on the street at 272 Capp St. and leads to the Yard with the regular door and roll-up garage door behind it.
It uses the Payphone as a keypad and has an RFID Token reader for 24 hour access card holders such as philanthropists and members.
Payphone Keypad
This is some ethernet cable split and used as low-voltage signal wires.
The current wiring of the gate phone keypad, to the brains in the grey box behind, is:
| From cable bundle | To phone component |
|---|---|
| Gray wire | row 1, pin D0 |
| Green wire | row 2, D1 |
| Brown wire | row 3, D2 |
| Red wire | row 4, D3 |
| Orange wire | column 1, D4 |
| Blue wire | column 2, D5 |
| Blue + Black dot wire | column 3, D6 |
Added to this, the red LED and front buzzer share a signal wire pair. Green and yellow are used for these. The wp:LED has bias, a correct direction. The buzzer, phone earpiece, is driven directly by the arduino, using a tone generation library.
The last 2 white wires are reserved for future use supporting voice from the phone.
https://cdn.discordapp.com/attachments/991541988337909780/1105417542337568818/20230508_223527.jpg
See Discord/#front-gate https://discord.com/channels/720514857094348840/991541988337909780/1104558594042642476
|
PHOTOGRAPHY WANTED: We need some updated photos of this. Does anyone have or want to take some photos they can Upload? | Category | |