History, Archive IE

From Noisebridge
Revision as of 19:14, 17 June 2012 by Algoldor (talk | contribs) (Created page with ' ====Project status 5/10/2011==== Today (5/10/2011) I've filled up the water bath (polystyrene) container with tab water and added the aquarium heater (200 w). I let it adjust …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Project status 5/10/2011

Today (5/10/2011) I've filled up the water bath (polystyrene) container with tab water and added the aquarium heater (200 w). I let it adjust to the temperature of the water to avoid rupture of the glass enclosure and switched it on, set on 30°C. I've moved our current experiment to the water bath and checked within two hours making sure that the temperature of the water bath is appropriate (by my hand, no thermometer available).

I plan to make the timer work within a day or two but I'll need hand with that because it doesn't have very intuitive interface.

Below is the short gallery of how did I set it up.


  • Experimental incubator is on
  • Heater, timer and extension lead.
    Heater, timer and extension lead.
  • Heater and timer connected.
    Heater and timer connected.
  • Polystyren water-bath.
    Polystyren water-bath.
  • Brew is in the incubator.
    Brew is in the incubator.
  • Whole brewing corner set up.
    Whole brewing corner set up.
  • The front of the 3D model of experimental incubator.
    The front of the 3D model of experimental incubator.
  • The top/side view of the 3D model of experimental incubator.
    The top/side view of the 3D model of experimental incubator.
Retrieved from "https://main-wiki.extremist.software/index.php?title=History,_Archive_IE&oldid=26156"