File:Lasercutter usb controller.jpg

Size of this preview: 600 × 600 pixels. Other resolution: 1,440 × 1,440 pixels.

Original file (1,440 × 1,440 pixels, file size: 597 KB, MIME type: image/jpeg)

The FSE Full spectrum ENG FSE USB Controller is broken and we need to replace this to get the Noisebridge lasercutter working again

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:47, 23 June 2013		1,440 × 1,440 (597 KB)	Romyilano (talk \| contribs)	The FSE Full spectrum ENG FSE USB Controller is broken and we need to replace this to get the Noisebridge lasercutter working again

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Exposure time	1/15 sec (0.066666666666667)
F Number	f/2.8
ISO speed rating	800
Lens focal length	3.85 mm
Latitude	37° 45′ 44.4″ N
Longitude	122° 25′ 9.6″ W
Altitude	22.141 meters above sea level
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Instagram
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.21
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	3.9112
APEX aperture	2.970853573907
APEX brightness	−0.940150614348
Metering mode	Spot
Flash	Flash did not fire, compulsory flash suppression
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	35 mm
Scene capture type	Standard
GPS time (atomic clock)	04:10:28.4
Measurement precision	Excellent (10)
Speed unit	Kilometers per hour
Speed of GPS receiver	0
GPS date	24 June 2013