User:Veloverso
Bookscanner Instructions
- Power on computer (button on top)
- Plug in mouse and keyboard
- Power on cameras: connect USB cable to power source
- Turn on light (check that power bar is switched on)
- Open book to desired page(s) and place face up underneath glass plate
- On the computer Desktop, create a new folder with your name/name of your project
- On the computer Desktop, open the DIY Book Scanner folder
- Copy "scan_continuous_rotate.py" and paste in your new folder
- Press down on bookscanner handle to raise book and press flat against glass plate; use handle to position book as its binding allows
- Double-click the scan_continuous_rotate.py script in your folder to run
- Open your folder to view preview images; confirm that images match the left and right side pages
- In Terminal window, press Enter to capture (save) images; follow other directions on screen as needed
- Verify all page information is seen in the captured image; check that no information is lost or cut off in the spine (gutter), margins, or binding
- Turn pages and repeat steps 12-13 to proceed through the book
- After capturing all your images, make sure to copy your files to your own storage
- Hit Q to quit the Terminal
- Power off cameras, computer, and lights
Notes:
File names will automatically increment with each capture (image1, image2, image3, etc).
Jump to image 0 to return to the first captured image. If you want to retake the image, select and hit Enter again (this will write over the existing file, so remember to save the original elsewhere if you need).
If you need to retake any images, it is recommended to wait until you have captured all images and then jump back to the image you want to write over.
Make sure to clean up the temporary preview files (delete, rename, move).
The computer has no internet connection; save your files to an external drive. Note that the computer is publicly accessible, so make sure to remove any files/data you want to keep private.
See Bookscanner for more information.