File:Creality Ender-3 Pro power switch cover.jpg

Original file (4,032 × 3,024 pixels, file size: 1.55 MB, MIME type: image/jpeg)

Summary

The power switch cover on the Ender-3 Pro 3D printer, held in place by a strip of tape with “DO NOT HACK” written on it.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	00:39, 13 February 2020		4,032 × 3,024 (1.55 MB)	Boredzo (talk \| contribs)	The power switch cover on the Ender-3 Pro 3D printer, held in place by a strip of tape with “DO NOT HACK” written on it.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone SE
Exposure time	1/15 sec (0.066666666666667)
F Number	f/2.2
ISO speed rating	200
Date and time of data generation	22:29, 12 February 2020
Lens focal length	4.15 mm
Latitude	37° 45′ 44.27″ N
Longitude	122° 25′ 8.81″ W
Altitude	8.64 meters above sea level
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	12.4.1
File change date and time	22:29, 12 February 2020
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	22:29, 12 February 2020
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	3.9069699450357
APEX aperture	2.2750070475475
APEX brightness	0.31078140422773
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	603
DateTimeDigitized subseconds	603
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	29 mm
Scene capture type	Standard
GPS time (atomic clock)	06:29:8.63
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	Magnetic direction
Direction of image	35.189208984375
Reference for bearing of destination	Magnetic direction
Bearing of destination	35.189208984375
GPS date	13 February 2020